Windshield Spray Nozzles, Adjusting
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Procedure:
-- Align the adjusted nozzle units via the adjusting screw -2- using a tool with an external TORX® size 9 -3- according to the specifications.
-- If the spray pattern still does not meet the specifications, clean the corresponding spray nozzles. Refer to WASHER NOZZLES, ADJUSTING .
NOTE:
The water jets of a nozzle unit can only be adjusted together and the height is adjusted via an adjusting screw. It is not possible to adjust the water jets individually or to adjust just one side.