Bumper Cover, Removing And Installing: Notes
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
- To complete the procedure, a second technician is required to be at the following position. Refer to Removing .
- Depending on the equipment version, the following additional work must be performed. Refer to Depending on the version, the following additional work procedures are required .
Special tools and workshop equipment required
- Hose Clamps - Up To 25 mm:3094
- Engine Bung Set:VAS 6122