Overview - Rear Lid Upper Trim Panel
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
- Rear Lid Side Trim Panel
- Press on until it engages audibly
- Removing and Installing. Refer to REAR LID UPPER TRIM PANEL, REMOVING AND INSTALLING .
- Rubber Buffer
- Quantity: 2 each
- Insert in the trim panel
- Clip
- Quantity: 2 each
- Insert in the trim panel
- Remove any clips remaining in the rear lid mounting points using the Omega Clip Tool:T40280 . To install, insert into the trim panel.
- Replace damaged or deformed clips
- Rear Lid Upper Trim Panel
- Press on until it engages audibly
- Removing and Installing. Refer to REAR LID UPPER TRIM PANEL, REMOVING AND INSTALLING .
- Rubber Buffer
- Quantity: 4
- Insert in the trim panel
- Clip
- Quantity: 4
- Insert in the trim panel
- Remove any clips remaining in the rear lid mounting points using the Omega Clip Tool:T40280 . To install, insert into the trim panel.
- Replace damaged or deformed clips
- Clip
- Insert in the trim panel
- Replace damaged or deformed clips
- Rear Lid Hinge Trim Panel
- Clip onto the rear lid hinge