Overview - Rear Lid Lower Trim Panel
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
- Emergency Release Cover
- Unclip using the Trim Removal Wedge:3409
- Clipped in the rear lid trim panel
- Rear Lid Lamp
- Quantity: 2
- Removing and Installing. Refer to COMPONENT LOCATION OVERVIEW - CONTROLS IN LUGGAGE COMPARTMENT .
- Rubber Buffer
- Quantity: 14
- Insert in the trim panel
- Clip
- Quantity: 16
- Insert in the trim panel
- Remove any clips remaining in the rear lid mounting points using the Omega Clip Tool:T40280 . To install, insert into the trim panel.
- Replace damaged or deformed clips
- Rear Lid Latch Trim Panel
- Press on until it engages audibly
- Removing and Installing. Refer to REAR LID LOWER TRIM PANEL, REMOVING AND INSTALLING .
- Rear Lid Closing Button
- Removing and installing. Refer to REAR LID REMOTE RELEASE BUTTON -E233-, REMOVING AND INSTALLING .
- Clip
- Insert in the trim panel
- Replace damaged or deformed clips
- Rear Lid Side Trim Panel
- Rear Lid Lower Trim Panel
- Press on until it engages audibly
- Removing and Installing. Refer to REAR LID LOWER TRIM PANEL, REMOVING AND INSTALLING .
- Bolt
- Quantity: 2
- 2 Nm
- Emergency Triangle
- Cover
- For the emergency triangle
- Engaged in the rear lid trim panel