Upper Air Duct Pipe, Removing And Installing, Excluding Engine Code DWRB: Removing
-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .
-- Remove the reinforcement brace. Refer to OVERVIEW - LOCK CARRIER .
Left Upper Air Duct Pipe:
-- Press the release buttons on both sides and remove the crankcase ventilation hose -4-.
-- Loosen the clamp -2- and remove the air duct hose -3-.
-- Remove the activated charcoal insert hose -1- to do so press the release buttons on both sides.
-- Unclip and free up the lines for the vacuum -5- from the bracket -6-.
-- Remove the bolts -arrows-.
-- Free up the air duct pipe -4- and remove it upward using the crankcase ventilation hose -7-.
Right Upper Air Duct Pipe:
-- Loosen the clamp -5- and remove the air duct hose -4-.
-- Remove the activated charcoal insert hose -6- to do so press the release buttons on both sides.
-- Unclip and free up the lines for the vacuum -3- from the bracket -2-.
-- Remove the bolts -arrows-.
-- Free up and remove the air duct pipe -1- upward.