Spoiler, Removing And Installing: Removing
-- Remove the rear lid upper trim panel. Refer to REAR LID UPPER TRIM PANEL, REMOVING AND INSTALLING .
-- Release and disconnect the connectors -1 and 2-.
-- Free up the cable grommets -3- by releasing the retainers in direction of -A arrows-.
-- Remove the nuts -arrows-.
-- Close the rear lid.
-- Press the spoiler -2- off of the rear lid using the : T10383/1 -1- and remove it -arrows-.
-- If the spoiler is to be replaced, also remove the following components:
- High-mounted brake lamp. Refer to HIGH-MOUNTED BRAKE LAMP BULB, REMOVING AND INSTALLING .