Emblem, Removing And Installing
- General Information - Name Badges and Emblems, Replacing. Refer to GENERAL INFORMATION - NAME BADGES AND EMBLEMS, REPLACING .
-- Remove the front bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .
-- Remove the center end panel. Refer to CENTER END PANEL, REMOVING AND INSTALLING .
-- If equipped, remove the peripheral camera. Refer to FRONT PERIPHERAL CAMERA -R243-, REMOVING AND INSTALLING .
-- Release the retainers -2- in direction of -arrow A- at the shown points -arrows-.
-- Remove the cover -1-.
-- Release the retainers -1- -arrows- by lifting the securing tab -2-.
-- Remove the emblem from the radiator grille -3-.
Installing
Install in reverse order of removal and note the following:
-- Press on the emblem until it audibly engages.