Rear Wheel Cover, Removing And Installing: Removing
-- Loosen the rear wheel housing liner from the retainer in the bumper cover area. Refer to OVERVIEW - FRONT WHEEL HOUSING LINER .
-- Release the catches in direction of -arrows- using needle nose pliers between the side panel mount -4- and the bumper cover -3-, and at the same time remove the wheel cover -2- from the bumper cover.
-- Carefully warm up the wheel cover using the : VAG1416 .
-- Pry up the wheel cover with the : T10383/1 from the side panel -1- at the same time do not damage the paint coat.