Spoiler, Removing And Installing: Removing
Vehicles with Lower Spoiler:
-- Loosen the rear wheel housing liner in the bumper cover area. Refer to OVERVIEW - REAR WHEEL HOUSING LINER .
-- Remove the bolts -4-.
-- Coat the mounting tabs -3- with some soapy water and release starting from the outside -arrows-.
-- Pull the spoiler -2- out of the bumper cover -1- and remove.
Continuation:
-- Remove the bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .
-- If equipped, free up the wires on the spoiler.
-- Release the catches -arrows-.
-- Remove the spoiler -1-.
-- If the spoiler is to be replaced, also remove the following components:
- If equipped, the rear diffuser. Refer to REAR DIFFUSER, REMOVING AND INSTALLING .
- Bumper Cover Trim Moldings. Refer to BUMPER COVER TRIM MOLDING, REMOVING AND INSTALLING .