Antenna Amplifier 2 -R111-, REMOVING AND INSTALLING: Removing

-- Turn off the ignition and all electrical equipment. Set the ignition key outside of the vehicle.

-- Remove the rear lid upper trim panel. Refer to REAR LID UPPER TRIM PANEL, REMOVING AND INSTALLING .

-- Release and disconnect the connectors -2- and -4- from the Antenna Amplifier 2 -R111- -3-.

Fig 1: Identifying Antenna Amplifier 2 -R111-

Courtesy of AUDI OF AMERICA, LLC

-- Loosen the screw -1- and remove the Antenna Amplifier 2 -R111- -3- from the rear lid.