Antenna Amplifier -R24-, REMOVING AND INSTALLING: Removing

-- Turn off the ignition and all electrical equipment. Set the ignition key outside of the vehicle.

-- Remove the rear lid upper trim panel. Refer to REAR LID UPPER TRIM PANEL, REMOVING AND INSTALLING .

-- Release and disconnect the connectors -1- and -4- on the Antenna Amplifier -R24- -2-.

Fig 1: Identifying Antenna Amplifier 4 -R113-

Courtesy of AUDI OF AMERICA, LLC

-- Loosen the screw -3- and remove the Antenna Amplifier -R24- -2- from the rear lid.