LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Turbocharger, Supercharger - (8-Cylinder Direct Injection 4.0L 4V TFSI Engine Ea825) >> 21 Turbocharger, Supercharger >> Charge Air System >> Air Duct Pipe, Removing And Installing >> Upper Air Duct Pipe, Removing And Installing, Engine Code DWRB >> Removing

Upper Air Duct Pipe, Removing And Installing, Engine Code DWRB: Removing

-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .

-- Remove the reinforcement brace. Refer to OVERVIEW - LOCK CARRIER .

Left Upper Air Duct Pipe:

GWWA21-11598Courtesy of AUDI

-- Remove the bolt -2- and remove the lines from the EVAP system and push slightly to the side.

-- Remove the bolts -arrows-.

-- Loosen the hose clamp -1-, remove the air duct hose and remove the air duct pipe -3-.

Right Upper Air Duct Pipe:

GWWA21-11661Courtesy of AUDI

-- Free up the vacuum line -2-.

-- Remove the bolt -3- and remove the lines from the EVAP system and push slightly to the side.

-- Remove the bolts -arrows-.

-- Loosen the hose clamp -4-, remove the air duct hose and remove the air duct pipe -1-.