Overview - Pneumatic System, Compressor
WARNING: This page is about a different car, the 2022 Audi SQ7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
- Driver Multi-Contour Seat Compressor -V439- with integrated Driver Multi-Contour Seat Control Module -J873-
- Front passenger side: Front Passenger Multi-Contour Seat Compressor -V440- with integrated Front Passenger Multi-Contour Seat Control Module -J872-
- Removing and Installing. Refer to PNEUMATIC SEAT COMPRESSOR, REMOVING AND INSTALLING .
- Rubber Bracket
- For the supercharger
- Quantity: 2
- Bracket
- for seat trim at the front
- Removing and Installing. Refer to SEAT SIDE TRIM/CONTROL MODULE/COMPRESSOR BRACKET, REMOVING AND INSTALLING .
- Front Seat
- Bolt
- Quantity: 2
- Tightening specification OVERVIEW - SEAT PAN
- Rubber Bracket
- For the supercharger
- Angle Piece for Pneumatic Line
- O-Ring
- Replace if necessary.