Overview - Seat Pan

WARNING: This page is about a different car, the 2022 Audi SQ7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Overview - Seat Bolster Inflation Adjuster. Refer to OVERVIEW - SEAT BOLSTER INFLATION ADJUSTER .
Overview - Controls for Power Seat Adjustment. Refer to OVERVIEW - CONTROLS FOR POWER SEAT ADJUSTMENT .

Courtesy of AUDI OF AMERICA, LLC

Mount
- For the fire extinguisher
- Equipment version: front passenger seat only
- Removing and Installing. Refer to FIRE EXTINGUISHER BRACKET, REMOVING AND INSTALLING .
Bolt
- Quantity: 2
- 8 Nm
Bolt
- Quantity: 4
- 7.5 Nm
Bracket
- For the fire extinguisher
- Seats without seat depth adjuster
- Equipment version: front passenger seat only
- Removing and Installing. Refer to FIRE EXTINGUISHER BRACKET, REMOVING AND INSTALLING .
Bracket
- For the fire extinguisher
- Seats with seat depth adjuster
- Equipment version: front passenger seat only
- Removing and Installing. Refer to FIRE EXTINGUISHER BRACKET, REMOVING AND INSTALLING .
Bolt
- Quantity: 2
- 3.5 Nm
Bolt
- 3.5 Nm
Retaining Bracket
- Quantity: 2
Trim
- For the seat depth adjustment
- Quantity: 2
- pull off forward
Seat Depth Adjuster Support
- Removing and Installing. Refer to SEAT DEPTH ADJUSTER, REMOVING AND INSTALLING .
Cover
- Front for seat rail
- Quantity: 2
- Removing and Installing. Refer to FRONT AND REAR SEAT RAIL COVER, REMOVING AND INSTALLING .
Cover
- For the seat depth adjustment
- Clip into the seat depth adjuster support
Seat Depth Adjuster
- Removing and Installing. Refer to SEAT DEPTH ADJUSTER, REMOVING AND INSTALLING .
Bolt
- Quantity: 2
- 2.5 Nm
Expanding Clip
Bracket
- for seat bolster inflation adjuster
- Quantity: 2
- With air cushion for seat bolster inflation adjuster
- Removing and Installing. Refer to SEAT BOLSTER INFLATION ADJUSTER AIR CUSHION, REMOVING AND INSTALLING .
Upholstery Wire
- For the seat pan
- Quantity: 2
Seat Side Trim
- Tunnel-side
- Removing and Installing. Refer to SEAT SIDE TRIM ON TUNNEL SIDE, REMOVING AND INSTALLING .
Expanding Clip
Seat Pan
- Disassembling and assembling. Refer to SEAT PAN, DISASSEMBLING AND ASSEMBLING .
Bracket
- For the footwell lamp
- Clip into the seat frame
Child Seat Anchor
- Equipment version: front passenger seat only
- Replace damaged or deformed child seat anchor
- Overview. Refer to OVERVIEW - FRONT CHILD SEAT ANCHORS .
Driver Seat Cushion Blower Fan -V390-
- Equipped on some models
- Front passenger side: Front Passenger Seat Cushion Blower Fan -V391-
- Removing and Installing. Refer to FRONT SEAT FAN, REMOVING AND INSTALLING .
Rubber Bracket
- for blower fan
- Quantity: 4
- Insert in the seat pan
Protective Cap
- for blower fan
- Removing and Installing. Refer to FRONT SEAT FAN, REMOVING AND INSTALLING .
Pop Rivet
- Quantity: 2
Cover
- Rear for seat rail
- Quantity: 2
- Removing and Installing. Refer to FRONT AND REAR SEAT RAIL COVER, REMOVING AND INSTALLING .
Cover
- Lower center side for seat rail
- Removing and Installing. Refer to LOWER CENTER SEAT RAIL COVER, REMOVING AND INSTALLING .
Bracket
- for seat side trim
- Seats with manual seat adjustment
- Removing and Installing. Refer to SEAT SIDE TRIM ON SIDE SILL SIDE, REMOVING AND INSTALLING .
Bolt
- Quantity: 3
- 7.5 Nm
Bracket
- for seat side trim
- Seats with power seat adjustment
- Removing and Installing. Refer to SEAT SIDE TRIM ON SIDE SILL SIDE, REMOVING AND INSTALLING .
Bolt
- Quantity: 5
- Tightening specification OVERVIEW - CONTROLS FOR POWER SEAT ADJUSTMENT
Bracket
- Clipped in the seat side trim
Seat Side Trim
- Side Sill Side
- Removing and Installing. Refer to SEAT SIDE TRIM ON SIDE SILL SIDE, REMOVING AND INSTALLING .
Expanding Clip
Actuator
- For power seat adjustment
- Removing and Installing. Refer to DRIVER/FRONT PASSENGER SEAT ADJUSTMENT CONTROL HEAD -E470- / -E471-, REMOVING AND INSTALLING .
Cover
- Upper center side for seat rail
- Removing and Installing. Refer to UPPER CENTER SEAT RAIL COVER, REMOVING AND INSTALLING .
Expanding Clip
Driver Seat Adjustment Control Head -E470-
- Equipped on some models
- Front passenger side: Front Passenger Seat Adjustment Control Head -E471-
- Overview. Refer to OVERVIEW - CONTROLS FOR POWER SEAT ADJUSTMENT .
Bolt
- Quantity: 3
- 7.5 Nm
Driver Seat Lumbar Support Adjustment Switch -E176- or Driver Seat Switch Module -E663-
- Overview. Refer to OVERVIEW - CONTROLS FOR POWER SEAT ADJUSTMENT .
- Equipped on some models
- Front passenger side: Front Passenger Seat Lumbar Support Adjustment Switch - E177-, Front Passenger Seat Switch Module -E664-
Bracket
- For the control module
- Equipped on some models: for power adjustable standard seat
- Removing and Installing. Refer to SEAT SIDE TRIM/CONTROL MODULE/COMPRESSOR BRACKET, REMOVING AND INSTALLING .
Seat Forward/Back Adjustment Handle
- Overview. Refer to OVERVIEW - SEAT BOLSTER INFLATION ADJUSTER .
Bracket
- For seat side trim/control module/compressor
- Removing and Installing. Refer to SEAT SIDE TRIM/CONTROL MODULE/COMPRESSOR BRACKET, REMOVING AND INSTALLING .
Bolt
- Quantity: 9
- 6.5 Nm
Seat Side Trim
- Front
- Removing and Installing. Refer to FRONT SEAT TRIM, REMOVING AND INSTALLING .