LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> S4 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 86 (Exterior Equipment) >> 66 Exterior Equipment >> Name Badges And Emblems >> Radiator Grille Name Badges And Emblems, Removing And Installing >> Emblem, Removing

Emblem, Removing

WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the front bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .

-- If equipped, remove the peripheral camera mount. Refer to COMPONENT LOCATION OVERVIEW - PERIPHERAL CAMERA .

-- A4, A5, from product improvement: remove end panel. Refer to BACKING PLATE, REMOVING AND INSTALLING, A4 AND A5 FROM PRODUCT IMPROVEMENT .

-- Release the tab -1- at the areas marked with -arrows- by lifting each securing tab -2-.

Fig 1: Releasing Tap
GWWA66-11291Courtesy of AUDI OF AMERICA, LLC

-- Remove the emblem from the radiator grille -3-.

Installing 

Install in reverse order of removal and note the following:

-- Press on the emblem until it audibly engages.