Center Console Insert
WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- 1.4 Nm
- Quantity: 4
- Cupholder
- Removing and installing. Refer to CUPHOLDER, REMOVING AND INSTALLING .
- Bolt
- Tightening specification. Refer to COMPONENT LOCATION OVERVIEW - INFOTAINMENT SYSTEM .
- Quantity: 4
- Center Console Insert
- Replace damaged or deformed clips
- Removing and installing. Refer to CENTER CONSOLE INSERT, REMOVING AND INSTALLING .
- Press on until it engages audibly
- Emergency Release Cover
- Engage in the cupholder and press on it until it engages audibly
- Cupholder Trim
- Multimedia System Control Head -E380-
- Component Location Overview. Refer to COMPONENT LOCATION OVERVIEW - INFOTAINMENT SYSTEM .
- Center Console Insert Decorative Trim
- Replace damaged or deformed clips
- Removing and installing. Refer to CENTER CONSOLE INSERT DECORATIVE TRIM, REMOVING AND INSTALLING .
- Press on until it engages audibly
- Center Console Decorative Trim
- Replace damaged or deformed clips
- Removing and installing. Refer to CENTER CONSOLE DECORATIVE TRIM, REMOVING AND INSTALLING .
- Press on until it engages audibly
- Storage Compartment Trim
- Bolt
- 1.5 Nm
- Storage Compartment
- Engage in the decorative trim and press on it until it engages audibly
- Driver Volume Control -E67-
- Component Location Overview. Refer to COMPONENT LOCATION OVERVIEW - INFOTAINMENT SYSTEM .
- Bolt
- Tightening specification. Refer to COMPONENT LOCATION OVERVIEW - INFOTAINMENT SYSTEM .
- Quantity: 2
- Selector Lever Transmission Range Display -Y5-
- Removing and installing. Refer to COMPONENT LOCATION OVERVIEW - CENTER CONSOLE LAMPS .
- Bolt
- 1.5 Nm
- Bolt
- Tightening specification. Refer to COMPONENT LOCATION OVERVIEW - CENTER CONSOLE LAMPS .
- Quantity: 4
- Bolt
- 1.4 Nm
- Quantity: 2