Overview - Instrument Panel

WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Instrument Panel

Screw/Expanding Clip
- 1.5 Nm
Light Switch Trim
- Removing and installing. Refer to LIGHT SWITCH TRIM, REMOVING AND INSTALLING .
- Press on until it engages audibly
Bolts
- 3 Nm
- Quantity: 2
Driver Side Outer Instrument Panel Vent
- Removing and installing. Refer to OUTER INSTRUMENT PANEL VENT, REMOVING AND INSTALLING .
- Press on until it engages audibly
Instrument Cluster Trim
- Removing and installing. Refer to INSTRUMENT CLUSTER TRIM, REMOVING AND INSTALLING .
Bolt
- 3 Nm
- Quantity: 3
Instrument Panel Side Cover
- Removing and installing. Refer to INSTRUMENT PANEL SIDE COVER, REMOVING AND INSTALLING .
- Press on until it engages audibly
Bolt
- 3 Nm
Rubber Buffer
- Insert into the instrument panel mount at the bottom of the windshield frame
- Quantity: 3
Windshield Projection Frame
- Equipped on some models
- Removing and installing. Refer to OVERVIEW - WINDSHIELD PROJECTION (HEAD-UP DISPLAY) .
Windshield Projection Cover
- Equipped on some models
- Removing and installing. Refer to OVERVIEW - WINDSHIELD PROJECTION (HEAD-UP DISPLAY) .
Trim for Speaker in Center
- Always replace if removed
- Removing and installing. Refer to SPEAKER TRIM, REMOVING AND INSTALLING .
- Press on until it engages audibly
Front Center Defroster Vent
- Removing and installing. Refer to FRONT CENTER DEFROSTER VENT, REMOVING AND INSTALLING .
- Press on until it engages audibly
Outer Speaker Trim
- Removing and installing. Refer to SPEAKER TRIM, REMOVING AND INSTALLING .
- Press on until it engages audibly
Speaker Mount
- Removing and installing. Refer to SPEAKER MOUNT, REMOVING AND INSTALLING .
Side Defroster Vent
- Removing and installing. Refer to SIDE DEFROSTER VENT, REMOVING AND INSTALLING .
- Press on it until it locks
Bolts
- 3 Nm
Instrument Panel
WARNING:
Risk of injury due to involuntary deployment.
- Pay attention to the safety precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS WHEN WORKING WITH PYROTECHNIC COMPONENTS .
- Removing and installing. Refer to INSTRUMENT PANEL, REMOVING AND INSTALLING .
Bolt
- 3 Nm
- Quantity: 4
MMI Screen Cover
- Removing and installing. Refer to MMI SCREEN COVER, REMOVING AND INSTALLING .
- Press on until it engages audibly
Bolt
- 3 Nm
- Quantity: 2
Bolt
- 3 Nm
- Quantity: 6
A/C Display Control Head Trim
- Removing and installing. Refer to DISPLAY CONTROL HEAD TRIM, REMOVING AND INSTALLING .
- Press on until it engages audibly
Screw/Expanding Clip
- 1.5 Nm
- Quantity: 3
Center Vent / Outer Front Passenger Side Instrument Panel Vent
- Removing and installing. Refer to CENTER VENT, REMOVING AND INSTALLING .
- Press on until it engages audibly