Overview - Manual Transmission Mount
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2019 Audi A4 allroad, 2019 Audi A4 Quattro, 2018 Audi A4 allroad, 2018 Audi A4 Quattro, and 2017 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
- Nut
- Tightening specifications. Refer to OVERVIEW - SUBFRAME MOUNT .
- Only remove when the transmission mount must be separated from the transmission support
- Bolt
- Tightening specifications. Refer to OVERVIEW - SUBFRAME MOUNT .
- Tunnel Crossmember
- Removing and installing. Refer to OVERVIEW - SUBFRAME MOUNT .
- Stop
- For the transmission mount
- Transmission Mount
- Removing and installing. Refer to TRANSMISSION MOUNT, REMOVING AND INSTALLING .
- Bolt
- Tightening specifications. Refer to OVERVIEW - SUBFRAME MOUNT .
- Transmission
- Nut
- Tightening specifications. Refer to OVERVIEW - SUBFRAME MOUNT .
- Only remove when the transmission mount must be separated from the transmission support
- Transmission Support
- Removing and installing. Refer to TRANSMISSION MOUNT, REMOVING AND INSTALLING .
- Bolt
- Tightening specifications. Refer to OVERVIEW - SUBFRAME MOUNT .
- Bolt
- 9 Nm
- Bracket
- For the connector