Transmission Mount, Removing And Installing
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2019 Audi A4 allroad, 2019 Audi A4 Quattro, 2018 Audi A4 allroad, 2018 Audi A4 Quattro, and 2017 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
Transmission Support, Removing with Transmission Mount
-- Remove the tunnel crossmember. Refer to OVERVIEW - SUBFRAME MOUNT .
-- Remove the bolts -arrows- and remove the transmission support with the transmission mount from the transmission.
Transmission Mount, Removing
-- Remove the bolts -1- and remove the stop -2- for the transmission mount.
-- Remove the nut -5- and remove the transmission mount -3- from the transmission support -4-.
Installing
-- Tighten the nut -5- hand-tight.
-- Tighten the bolts -1- and then the nut -5-.
Further installation is the reverse order of removal.
Tightening Specifications
- Refer to OVERVIEW - SUBFRAME MOUNT .