Overview - Luggage Compartment Roll Cover

WARNING: This page is about a different car, the 2022 Audi SQ7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Luggage Compartment Roll Cover

Courtesy of AUDI OF AMERICA, LLC

Bolt
- 3.5 Nm
Roll Cover Guide Rail
- Available only together with -item
- Removing and Installing. Refer to LUGGAGE COMPARTMENT COVER MOTOR, REMOVING AND INSTALLING .
Bolt
- 3.5 Nm
Bolt
- 3.5 Nm
Left Bracket
- under the luggage compartment side trim panel
- Removing and Installing. Refer to ROLL COVER BRACKET, REMOVING AND INSTALLING .
Rivet
- Quantity: 3
Luggage Compartment Roll Cover
Nut
- Quantity: 2
- 3.5 Nm
Right Bracket
- under the luggage compartment side trim panel
- Removing and Installing. Refer to ROLL COVER BRACKET, REMOVING AND INSTALLING .
Frame
- For luggage compartment roll cover handle
- Not available separately. Refer to the Parts Information for the repair kit.
- Replacing. Refer to LUGGAGE COMPARTMENT ROLL COVER HANDLE, REMOVING AND INSTALLING .
Handle
- For luggage compartment roll cover
- Not available separately. Refer to the Parts Information for the repair kit.
- Replacing. Refer to LUGGAGE COMPARTMENT ROLL COVER HANDLE, REMOVING AND INSTALLING .
Bolt
- Quantity: 2
- thread cutting
- Position the bolt by hand and tighten it until it finds the old threads. Then tighten the bolt to the specification.
- 0.35 Nm
Rivet
Locking Pin
- Not available separately. Refer to the Parts Information for the repair kit.
- Riveted with roll cover
Roll Cover Catch
- Clipped into the guide rails
- Removing and Installing. Refer to D-PILLAR TRIM PANEL, REMOVING AND INSTALLING .
Nut
- 3.5 Nm
Nut
- Quantity: 2
- 3.5 Nm
Luggage Compartment Cover Motor 1 -V473-
- Available only together with -item
- Removing and Installing. Refer to LUGGAGE COMPARTMENT COVER MOTOR, REMOVING AND INSTALLING .