LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> Q5 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 86 (Hood, Lids (Fy & 87)) >> 55 Hood, Lids >> Rear Lid >> Striker, Removing And Installing >> Removing

Striker, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the lock carrier trim panel. Refer to LOCK CARRIER TRIM PANEL, REMOVING AND INSTALLING .

-- Disconnect the connector -2-.

GWWA55-11352Courtesy of AUDI OF AMERICA, LLC

-- Remove nuts -arrows- and remove the striker -1-.

-- If the striker is replaced, remove the Rear Lid -Closed- Sensor 1 - G525- /Rear Lid -Closed- Sensor 2 - G526-. Refer to OVERVIEW - BODY TAIL LAMPS .