Crankcase Ventilation Module, Removing And Installing: Installing

WARNING: This page is about a different car, the 2022 Audi SQ5, 2021 Audi SQ5, 2020 Audi SQ5, 2019 Audi SQ5, and 2018 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

Check the O-ring for damage. Refer to OVERVIEW - CRANKCASE VENTILATION .
Replace the seal after removal.

-- Install the heat shield and engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .