Overview - Crankcase Ventilation
WARNING: This page is about a different car, the 2022 Audi SQ5, 2021 Audi SQ5, 2020 Audi SQ5, 2019 Audi SQ5, and 2018 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
- Camshaft Housing
- Hose/Plug
- Depending on the version
- O-Ring
- Equipped on some models
- Not available separately; replace if leaking ) OVERVIEW - CRANKCASE VENTILATION or damaged
- Seal
- Always replace after removing.
- Crankcase Ventilation Module
- Removing and installing. Refer to CRANKCASE VENTILATION MODULE, REMOVING AND INSTALLING .
- Grommet
- Seal
- Always replace if damaged
- Cap
- Bolt
- Tightening Specifications and Sequence. Refer to Fig 2.
- O-Ring
- Not available separately; replace if leaking ) OVERVIEW - CRANKCASE VENTILATION or damaged
- Hose
- For the crankcase ventilation
- The crankcase ventilation hose cannot be removed from the air duct pipe without damage. Refer to OVERVIEW - CHARGE AIR SYSTEM .
Crankcase Ventilation Module - Tightening Specifications and Sequence
-- Tighten the bolts in the sequence shown to 9 Nm.