LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> Q5 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Body Front (Fy)) >> 50 Body Front >> Fender >> Fender, Removing And Installing >> Removing

Fender, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the drip rail. Refer to DRIP RAIL, REMOVING AND INSTALLING .

-- Remove the bolt -1-.

GWWA50-10846Courtesy of AUDI OF AMERICA, LLC

-- Open the front door.

-- Remove the bolt -2-.

-- Remove the rear cover for the fender. Refer to REAR FENDER COVER, REMOVING AND INSTALLING .

-- Remove the wheel cover. Refer to WHEEL COVER, REMOVING AND INSTALLING, FRONT .

-- Remove the bumper cover mount. Refer to BUMPER COVER MOUNT, REMOVING AND INSTALLING .

-- Remove the windshield washer fluid reservoir. Refer to WASHER FLUID RESERVOIR, REMOVING AND INSTALLING .

-- Remove the bolts -1 and 2-.

GWWA50-10955Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -2 and 3-.

GWWA50-10954Courtesy of AUDI OF AMERICA, LLC

-- Remove the fender -1-.