Drip Rail, Removing And Installing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi SQ5, and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Hand drill
- 5 mm drill bit
Drip Rail, Removing
-- Starting at the bottom, carefully remove the drip rail -1- upward -arrow-.
Drip Rail Clamping Strip, Removing
-- Drill out the rivet heads -arrows- and drive out the rivet shafts.
-- Remove the clamping strip -1-.
Installing
-- Push in the drip rail -2- starting at the top in the retaining strip -5- and clip -1- all the way.
3 - Windshield
4 - Roof
6 - A-Pillar
Installation Instructions. Refer to OVERVIEW - DRIP RAIL .