Ribbed Belt For Generator, Removing And Installing, 2.9L Engine: Removing
WARNING: This page is about a different car, the 2022 Audi SQ5, 2021 Audi SQ5, 2020 Audi SQ5, 2019 Audi SQ5, and 2018 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
Depending on the model, preliminary work may be required. Refer to RIBBED BELT, REMOVING AND INSTALLING .
-- Remove the ribbed belt from the A/C compressor. Refer to RIBBED BELT, REMOVING AND INSTALLING .
CAUTION:
Risk of destroying a used ribbed belt by reversing the running direction.
- Mark the running direction before removal.
- Pay attention to the running direction when reinstalling.
-- Pivot the tensioner counter-clockwise -arrow- using a wrench to release the tension on the ribbed belt.
-- Lock the tensioner using the :T10060A and remove the ribbed belt.