Overview - SUBFRAME Mount

WARNING: This page is about a different car, the 2022 Audi SQ5, 2021 Audi SQ5, 2020 Audi SQ5, 2019 Audi SQ5, and 2018 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

Engine Mount

Courtesy of AUDI OF AMERICA, LLC

Subframe
Engine Mount
- With:
  - Left Electrohydraulic Engine Mount Solenoid Valve -N144-
  - Right Electrohydraulic Engine Mount Solenoid Valve -N145-
- Removing and installing. Refer to ENGINE MOUNT, REMOVING AND INSTALLING .
Bolt
- 55 Nm
Bolt
- 55 Nm
Engine Support
- Removing and installing. Refer to ENGINE SUPPORT, REMOVING AND INSTALLING .
Not Installed
Not Installed
Bolt
- 90 Nm + 90°
- Always replace after removing.
Bolt
- 30 Nm

Transmission Mount

Fig 1: Exploded View Of Transmission Mount

Courtesy of AUDI OF AMERICA, LLC

Bolt
- Tightening specifications. Refer to OVERVIEW - SUBFRAME .
Tunnel Crossmember
- Removing and installing. Refer to OVERVIEW - SUBFRAME .
Nut
- Tightening specifications. Refer to OVERVIEW - SUBFRAME .
- Only remove when the transmission mount must be separated from the transmission support
Transmission Support
- Removing and installing. Refer to TRANSMISSION MOUNT, REMOVING AND INSTALLING .
Bolt
- Tightening specifications. Refer to OVERVIEW - SUBFRAME .
Transmission Mount
- Removing and installing. Refer to TRANSMISSION MOUNT, REMOVING AND INSTALLING .
Stop
- For the transmission mount
Bolt
- Tightening specifications. Refer to OVERVIEW - SUBFRAME .
- Only remove when the transmission mount must be separated from the transmission support
Nut
- Tightening specifications. Refer to OVERVIEW - SUBFRAME .
- Only remove when the transmission mount must be separated from the transmission support