LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> Q5 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Cooling System [CWGD]) >> 19 Cooling System >> Coolant Pipes >> Coolant Pipes, Removing And Installing >> Left Front Coolant Pipe, Removing And Installing >> Removing

Left Front Coolant Pipe, Removing And Installing: Removing

WARNING: This page is about a different car, the 2022 Audi SQ5, 2021 Audi SQ5, 2020 Audi SQ5, 2019 Audi SQ5, and 2018 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING .

-- Remove the ribbed belt from the A/C compressor. Refer to RIBBED BELT, REMOVING AND INSTALLING .

-- Remove the left front lower longitudinal member. Refer to LOWER LONGITUDINAL MEMBER, REMOVING AND INSTALLING

-- Remove the A/C compressor from the bracket and tie it up on the left side. Refer to A/C COMPRESSOR, REMOVING AND INSTALLING FROM BRACKET .

-- Remove the lock carrier cover. Refer to LOCK CARRIER COVER, REMOVING AND INSTALLING .

-- Remove the bolts -arrows- and air duct -1-.

GWWA23-11115Courtesy of AUDI OF AMERICA, LLC

-- Release the catches -arrows- and remove the air duct -2-.

GWWA19-12653Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and remove the left front coolant pipe from the coolant pump.

GWWA19-12531Courtesy of AUDI OF AMERICA, LLC