Front Coolant Pipe, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Audi SQ5, 2021 Audi SQ5, 2020 Audi SQ5, 2019 Audi SQ5, and 2018 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING .
-- Remove the upper air duct pipe. Refer to AIR DUCT PIPE, REMOVING AND INSTALLING .
-- Remove the generator ribbed belt. Refer to RIBBED BELT, REMOVING AND INSTALLING .
-- Position the :T10172A with the :T10172/10 on the belt pulley -1- and remove the bolts -2-.
-- Remove the belt pulley.
-- Remove the bolts -arrows- and remove the front coolant pipe -1- from the right cylinder head and from the shut-off valve.