Height, Adjusting Using Spring Element

WARNING: This page is about a different car, the 2019 Audi S5 Sportback, 2019 Audi A5 Sportback, 2018 Audi S5 Sportback, and 2018 Audi A5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.

Adjustment dimensions. Refer to ADJUSTMENT DIMENSIONS .

Special tools and workshop equipment required

Adjustment Gauge: 3371

Fig 1: Gap Adjustment Gauge (3371)
Courtesy of AUDI OF AMERICA, LLC

Procedure

Front bumper installed.
The spring element -5- must be tensioned.

Courtesy of AUDI OF AMERICA, LLC

-- Loosen the bolt -4- using a screwdriver -3-.

-- Adjust the distance between the radiator grille -1- and the hood -2-.

-- Tighten the bolt.

Tightening Specifications

Refer to OVERVIEW - LOCK CARRIER