Overview - Lock Carrier
WARNING: This page is about a different car, the 2019 Audi A5 Sportback and 2018 Audi A5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
- Overview - Adjusting Element. Refer to OVERVIEW - ADJUSTING ELEMENT .
- Impact Member
- Overview. Refer to OVERVIEW - IMPACT MEMBER .
- Air Duct
- Clipped into the bumper cover bracket
- Bolt
- 8 Nm
- Lower Air Guide
- For the radiator
- Bumper Cover Bracket
- Removing and Installing. Refer to BUMPER COVER BRACKET, REMOVING AND INSTALLING .
- Bolt
- Tightening specification. Refer to OVERVIEW - AIR FILTER HOUSING - 2.0L or OVERVIEW - AIR FILTER HOUSING - 3.0L & 2.9L .
- Air Duct
- For the air filter housing
- Clean off any salt and dirt
- Upper Air Duct
- For the radiator
- Lock Carrier
- Removing and Installing. Refer to LOCK CARRIER, REMOVING AND INSTALLING .
- Bolt
- 10 Nm
- Bolt
- Quantity: 2
- 14 Nm
- Mount
- For impact member
- Bolt
- Tightening specification -Item 6- : Bolt .
- Bolt
- 5 Nm
- Pop Rivet
- Quantity: 2
- Spring Element
- For the bumper cover bracket
- Removing and Installing. Refer to SPRING ELEMENT FOR BUMPER COVER BRACKET, REMOVING AND INSTALLING .
- Adjusting. Refer to HEIGHT, ADJUSTING USING SPRING ELEMENT .
Spring element for bumper cover bracket, market-specific version
- Impact Member
- Pop Rivet: Quantity 2
- Support with support for bumper cover bracket. Refer to SPRING ELEMENT FOR BUMPER COVER BRACKET, REMOVING AND INSTALLING for removing and installing. Refer to HEIGHT, ADJUSTING USING SPRING ELEMENT for adjusting.
Retaining pin for front noise insulation, A5 cabriolet
- Lock Carrier
- Bolt: 8 Nm
- Retaining Brace
- Screw: 4.5 Nm