Overview - Battery, AUDI RS3 Through My 2018
WARNING: This page is about a different variant/trim than selected.
- Nut
- 20 Nm
- Battery
- Removing and installing. Refer to BATTERY, REMOVING AND INSTALLING, BATTERY IN LUGGAGE COMPARTMENT .
- Positive Cable
- To the luggage compartment E-box
- Nut
- Tightening specification. Refer to OVERVIEW - RELAY CARRIER, INSTRUMENT PANEL, E-BOX, LUGGAGE COMPARTMENT .
- Nut
- 6 Nm
- Positive Terminal Cover
- Retainer
- Battery Cover
- Nut
- 20 Nm
- Quantity: 2
- Wire
- For the Battery Monitoring Control Module -J367-
- Follow the sequence when connecting the ground cable. Refer to Connecting
- Nut
- 6 Nm
- Nut
- 15 Nm
- Ground Cable
- With Battery Monitoring Control Module -J367-
- Disconnecting and connecting. Refer to BATTERY, DISCONNECTING AND CONNECTING, BATTERY IN LUGGAGE COMPARTMENT .
- Removing and Installing. Refer to GROUND CABLE WITH Battery Monitoring Control Module -J367-, REMOVING AND INSTALLING, BATTERY IN LUGGAGE COMPARTMENT .
- Screw
- Central Venting System Hose
- Grommet
- For the central venting system hose
- Battery Bracket