Bumper Cover, Removing And Installing, Vehicles With Side Auxiliary Radiator: Notes

Vehicles from MY 2017: the bumper cover, crash sensors for the pedestrian protection and the Airbag Control Module -J234- are different for the basic and S line versions. Exchanging of components is not permitted. Allocation of bumper cover, the pedestrian protection crash sensors and the Airbag Control Module -J234-. Refer to the Parts Information.

• To complete the procedure, a second technician is required to be at the following position found here: Removing - DISENGAGE THE SIDE WALL -3- FROM THE FRONT SIDE PANEL -ARROW- AND REMOVE THE BUMPER COVER FORWARD WITH A SECOND TECHNICIAN. .

Special Tools And Workshop Equipment Required 

• Engine Bung Set:VAS6122