Cylinder Head Cover, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi S3, 2017 Audi A3 Quattro, 2017 Audi A3, 2016 Audi S3, and 2016 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

Replace the O-ring.
Replace the cylinder head cover gasket and the cylinder head cover bolts if they are damaged or if there are leaks.

-- Install the vacuum hose. Refer to CONNECTION DIAGRAM - VACUUM SYSTEM .

-- Install the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .