Connection Diagram - Vacuum System
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi S3, 2017 Audi A3 Quattro, 2017 Audi A3, 2016 Audi S3, and 2016 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Vacuum Line
- Installation position. Refer to Fig 2.
- To remove, remove the intake manifold
- Check Valve
- Note the installation position
- Cylinder Head Cover
- with vacuum reservoir
- Charge Air Regulation Vacuum Diaphragm
- With the Charge Air Pressure Actuator Position Sensor -G581-
- On the turbocharger
- Vacuum Control Line
- From the Wastegate Bypass Regulator Valve -N75- to the turbocharger vacuum diaphragm
- Wastegate Bypass Regulator Valve -N75-
- To Brake Booster
- Check Valve
- Note the installation position
- Vent Line
- To Air Filter Housing
- To Vacuum Pump
- In the oil pump. Refer to OVERVIEW - OIL PAN/OIL PUMP .
Vacuum Line Installation Position
-- -A arrows- bolts 8 Nm.
-- -Arrow B- bracket.