Overview - Bevel Box
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2017 Audi S3, 2017 Audi A3 Quattro, 2016 Audi S3, 2016 Audi A3 Quattro, and 2016 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- Tightening specification -item 3- OVERVIEW - DIFFERENTIAL
- Heat Shield
- For drive axle
- Bolt
- Tightening specification. Refer to DRIVE AXLE
- Bolt
- Tightening specification. Refer to appropriate service information. .
- Heat Shield
- For drive axle
- Bolt
- Tightening specification. Refer to appropriate service information. .
- Bevel Box
- Removing. Refer to BEVEL BOX, REMOVING
- Installing. Refer to BEVEL BOX, INSTALLING
- Bolt
- Tightening specification. Refer to appropriate service information.
- Always replace after removing
- Bracket
- For bevel box
- Different versions. For the correct allocation. Refer to the parts information.
- Bolt
- Tightening specifications and sequence:
- Vehicles with a TFSI engine. Refer to appropriate service information.
- Vehicles with a TDI engine. Refer to appropriate service information.
- Tightening specifications and sequence:
- Bolt
- Tightening specifications and sequence:
- Vehicles with a TFSI engine. Refer to appropriate service information
- Vehicles with a TDI engine. Refer to appropriate service information
- Tightening specifications and sequence: