Overview - Front Passenger Airbag
WARNING: This page is about a different car, the 2017 Audi A3, 2016 Audi A3, and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
- Connector
- For Front Passenger Airbag Igniter 1 -N131-
- Nut
- 8 Nm
- Quantity: 2
- Replace after removing
- Threaded Pins
- For the airbagCAUTION:
There is a risk of malfunctions do to a faulty ground connection.
- The threaded pins and contact surface must be free of paint, coating, and corrosion, the threaded connection serves as the Ground (GND) connection for the airbag.
- Check that the threaded bushings are seated securely before installing the airbag, refer to INSTALLING .
- For the airbag
- Instrument Panel
- Replace the instrument panel after an airbag has deployed, refer to INSTRUMENT PANEL, REMOVING AND INSTALLING .
- Threaded Pins
- For the airbagCAUTION:
There is a risk of malfunctions do to a faulty GND connection.
- The threaded pins and contact surface must be free of paint, coating, and corrosion, the threaded connection serves as the GND connection for the airbag.
- Check that the threaded bushings are seated securely before installing the airbag, refer to INSTALLING .
- For the airbag
- Nut
- 8 Nm
- Quantity: 2
- Replace after removing
- Front Passenger Airbag
- With Front Passenger Airbag Igniter 1 -N131-WARNING:
- Follow all pyrotechnic components safety precautions, refer to PYROTECHNIC COMPONENTS SAFETY PRECAUTIONS .
- Follow the allocation of the airbag unit to the instrument panel, refer to the Parts information.
- Locking and activating possible with key switch
- Removing and installing, refer to FRONT PASSENGER AIRBAG UNIT WITH IGNITER, REMOVING AND INSTALLING .
- With Front Passenger Airbag Igniter 1 -N131-