Overview - Instrument Panel
WARNING: This page is about a different car, the 2017 Audi A3, 2016 Audi A3, and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- Quantity: 2
- Tightening specification, refer to OVERVIEW - INSTRUMENT CLUSTER .
- Instrument Cluster
- Assembly overview, refer to OVERVIEW - INSTRUMENT CLUSTER .
- Bolt
- 3 Nm
- Instrument Panel Vent
- Quantity: 4
- Removing and installing, refer to INSTRUMENT PANEL VENT, REMOVING AND INSTALLING .
- Bolt
- 3 Nm
- Instrument Panel Side Cover
- Removing and installing, refer to INSTRUMENT PANEL SIDE COVER, REMOVING AND INSTALLING .
- Press on until it engages audibly
- Bolt
- 3 Nm
- Rubber Buffer
- Quantity: 2
- Pushed on the instrument panel mount under the windshield frame
- Instrument PanelWARNING:
- Follow all pyrotechnic components safety precautions, refer to PYROTECHNIC COMPONENTS SAFETY PRECAUTIONS .
- Follow the allocation of the airbag to the instrument panel, refer to the Parts Information.
- Removing and installing, refer to INSTRUMENT PANEL, REMOVING AND INSTALLING .
- Bolt
- 3 Nm
- Multimedia System Control Head -E380- or Front Information Display Control Head -J685-
- Allocation, refer to the Parts Information.
- Component location overview Multimedia System Control Head -E380-, refer to COMPONENT LOCATION OVERVIEW - RADIO or Front Information Display Control Head -J685- refer to COMPONENT LOCATION OVERVIEW - INFOTAINMENT SYSTEM .
- Mid-Range Speaker
- Allocation, refer to the Parts Information.
- Component location overview, refer to COMPONENT LOCATION OVERVIEW - SOUND SYSTEM .
- Front Center Defroster Vent
- With additional threaded connection, refer to Fig 2.
- Removing and installing, refer to FRONT CENTER DEFROSTER VENT, REMOVING AND INSTALLING .
- Sunlight Photo Sensor -G107-
- Allocation, refer to the Parts Information.
- Removing and installing, refer to HUMIDITY SENSOR -G355- RAIN/LIGHT RECOGNITION SENSOR -G397- SUNLIGHT PHOTO SENSOR -G107-, REMOVING AND INSTALLING .
- Center Speaker Trim
- Removing and installing, refer to SPEAKER TRIM, REMOVING AND INSTALLING .
- Press on until it engages audibly
- MMI Screen Cover
- Removing and installing, refer to MMI SCREEN COVER, REMOVING AND INSTALLING .
- Replace after removing
- Press on it until it locks
- Side Defroster Vent
- Quantity: 2
- Removing and installing, refer to SIDE DEFROSTER VENT, REMOVING AND INSTALLING .
- Bolt
- 3 Nm
- Bolt
- Quantity: 2
- Tightening specification, refer to COMPONENT LOCATION OVERVIEW - SOUND SYSTEM .
- Instrument Panel Decorative Trim
- Allocation, refer to the Parts Information.
- Removing and installing, refer to INSTRUMENT PANEL DECORATIVE TRIM, REMOVING AND INSTALLING .
- Press on until it engages audibly
- Bolt
- 3 Nm
- Front Passenger Airbag
- with Front Passenger Airbag Igniter 1 -N131-WARNING:
- Follow all pyrotechnic components safety precautions, refer to PYROTECHNIC COMPONENTS SAFETY PRECAUTIONS .
- Follow the allocation of the airbag to the instrument panel, refer to the Parts Information.
- Overview, refer to OVERVIEW - FRONT PASSENGER AIRBAG
- with Front Passenger Airbag Igniter 1 -N131-
- Support
- Quantity: 2
- Removing and installing, refer to GLOVE COMPARTMENT, REMOVING AND INSTALLING .
- Bolt
- Tightening specification, refer to -item 15- OVERVIEW - INSTRUMENT PANEL CENTRAL TUBE => List Item:Bolt.
- Instrument Panel Button
- With:
- Emergency Flasher Button -E229-
- TASR/ESP Button -E256-
- Parking Aid Button -E266-
- Parallel Parking Assistance Button -E581-
- Front Display Open/Close Button -E462-
- Driving Profile Selection Switch Module -E592-
- Start/Stop Mode Button -E693-
- Front Passenger Airbag -Disabled- Indicator Lamp -K145-
- Component Location Overview, refer to COMPONENT LOCATION OVERVIEW - INSTRUMENT PANEL CONTROLS .
- With:
- Display and Control Unit
- Heater Control Module -J65-
- Climatronic Control Module -J255-
- A/C Control Module -J301-
- Allocation, refer to the Parts Information.
- Component location overview, refer to COMPONENT LOCATION OVERVIEW - DISPLAY CONTROL HEAD (CABRIOLET) / COMPONENT LOCATION OVERVIEW - DISPLAY CONTROL HEAD (SEDAN) .
- Bolt
- 3 Nm
- Quantity: 2
- Instrument Panel Decorative Trim
- Allocation, refer to the Parts Information.
- Removing and installing, refer to INSTRUMENT PANEL DECORATIVE TRIM, REMOVING AND INSTALLING .
- Press on until it engages audibly
-- Tighten the bolts -1 and 3- to 2 Nm.