Overview - Headliner

WARNING: This page is about a different variant/trim than selected.

Fig 1: Exploded View Of Headliner

Courtesy of AUDI OF AMERICA, LLC

Headliner
- Removing and installing. Refer to HEADLINER, REMOVING AND INSTALLING .
  CAUTION:
  - The headliner bends easily.
  - Replace the headliner if it is bent.
Clip
- Replace after removing
- Insert in the headliner
- Remove the clips that are still in the mounting points on the body using the Omega Clip Tool: T40280 .
- With hooks
Roof Reinforcement
- Install on the body. Refer to ROOF REINFORCEMENT, ATTACHING TO BODY .
Clip
- Replace after removing
- With hooks
- Insert in the headliner
- Remove the clips that are still in the mounting points on the body using the Omega Clip Tool: T40280 .
Clip
- Replace damaged or deformed clips
- Remove any remaining clips in the body mounting points using the Omega Clip Tool: T40280 . To install, insert into the headliner.
- Insert in the headliner
Clip
- Replace damaged or deformed clips
- Remove any remaining clips in the body mounting points using the Omega Clip Tool: T40280 . To install, insert into the headliner.
- Quantity: 2
- Insert in the headliner