Charge Air System, Checking For Leaks
WARNING: This page is about a different car, the 2018 Audi TT Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Procedure
-- Remove the engine cover. Refer to ENGINE COVER .
-- Pay attention to the guidelines for clean working conditions. Refer to GUIDELINES FOR CLEAN WORKING CONDITIONS .
-- Loosen the hose clamps -3- and remove the air duct hose.
Refer to CHARGE AIR SYSTEM, CHECKING FOR LEAKS .
Assembling
Assemble in the reverse order of removal. Note the following:
- Secure all hose connections with hose clamps that match the ones used in series production.
-- Install the engine cover. Refer to ENGINE COVER .
Tightening Specifications
- Refer to OVERVIEW - CHARGE AIR SYSTEM .