Timing Mechanism Drive Chain, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 Audi S8, 2015 Audi A8 Quattro, 2014 Audi S8, 2014 Audi A8 Quattro, and 2013 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
NOTE:
Replace any bolts that were tightened with an additional turn.
-- Position the timing mechanism drive chain according to the markings made on the drive chain sprockets during removal.
-- Install the guide rail and tighten the bolts -1-.
-- Install the chain tensioner and tighten the bolts -2-.
-- Press the drive chain tensioner guide rail in direction of -arrow- and pull Locking Pin T40071 out of the chain tensioner.
-- Install the power take-off drive chain, refer to INSTALLING .
-- Install the chain tensioner for camshaft timing chain, refer to INSTALLING .
-- Position the camshaft timing chain on the camshafts, refer to INSTALLING .