LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> S8 >> Repair and Diagnosis >> External Pages >> Different car >> Section 564 (4.0L - Cylinder Head & VALVETRAIN - Engine Code(S): CEUA, CGTA, CTFA & CTGA) >> 15 Cylinder Head, VALVETRAIN >> Chain Drive >> Power Take-Off Drive Chain, Removing And Installing >> Installing

Power Take-Off Drive Chain, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 Audi S8, 2015 Audi A8 Quattro, 2014 Audi S8, 2014 Audi A8 Quattro, and 2013 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE:

Replace the seal.

Replace any bolts that were tightened with an additional turn.

-- Install the timing chain cover lower section, refer to INSTALLING .

scientia non olet · About LEMON Manuals