Slotted Guide Rail Guide, Removing And Installing, K Frame: Installing

-- When installing align the frame to the markings and attach with the bolts.

• Make sure when positioning that the slotted guide rail guide is only pushed forward up to the respective position. This could otherwise cause damage to the wind deflector.

-- Tighten the bolts from front to rear to the tightening specification, alternating from side to side.

-- Perform an adaptation. Refer to Sunroof Control Module -J245-, PROGRAMMING .

Tightening Specifications 

• Bolts -A and B- Removing - Remove the bolts : 2.5 Nm
• Bolts -A- Removing - bolts : 3.5 Nm
• Bolts -arrows- Removing - bolts : 4 Nm