Release Cable, Removing And Installing: Notes
Release Cable Routing in Vehicle Interior
-- Route the release cable -2- along the >>A-pillar<< as shown.
-- Press the grommet -1- onto the side >>A-pillar<< from the interior.
Routing the Release Cable Inside the Engine Compartment
- Grommet
- Fender Flange
- Release Cable
-- Starting from the interior, route the release cable -3- forward in the engine compartment and along the fender mounting flange as illustrated.
-- Press the release cable completely in the clips.
-- Push the coupling into the lock carrier. Refer to Release Cable Coupling, Removing and Installing .
- Latch
- Removing and installing. Refer to LATCH, REMOVING AND INSTALLING .
- Release Cable Coupling
- Knurl
- To adjust so that the hood catches unlock evenly.
- Clip