Antenna Amplifier 3 -R112-, REMOVING AND INSTALLING, 3-DOOR AND 5-DOOR VEHICLES: Removing

-- Turn off the ignition and all electrical equipment and remove the ignition key.

-- Remove the upper rear lid trim panel. Refer to OVERVIEW - REAR LID UPPER TRIM PANEL .

-- Release and disconnect the connectors -2- and -4- from the Antenna Amplifier 3 -R112- -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Only loosen the screw -3- (do not remove) and remove the Antenna Amplifier 3 -R112- -1- from the rear lid.