Oil Spray Jets, Removing And Installing: Removing

WARNING: This page is about a different car, the 2016 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Removing Cylinder "1" Through "3" :

The transmission is removed. Refer to TRANSMISSION, REMOVING [0GC] , or TRANSMISSION, REMOVING [0D9 .

-- Remove the oil pan upper section. Refer to OIL PAN UPPER SECTION, REMOVING AND INSTALLING .

Courtesy of AUDI OF AMERICA, LLC

CAUTION:

- Only let the engine turn in the direction of engine rotation.

-- Turn the crankshaft with the :T40263 , :T40314 and the 24 mm socket -arrow- until the corresponding bolt is accessible.

Removing Cylinder "4" :

The engine is removed and secured to the engine/transmission holder. Refer to ENGINE, SECURING TO ENGINE AND TRANSMISSION HOLDER .

-- Remove the oil pan upper section. Refer to OIL PAN UPPER SECTION, REMOVING AND INSTALLING .

-- Remove the balance shaft timing chain. Refer to CAMSHAFT TIMING CHAIN, REMOVING AND INSTALLING .

-- Remove the connecting rod bearing cap.

-- Remove the crankshaft bearing cap.

-- Remove the crankshaft.

Continued for All Cylinders:

Courtesy of AUDI OF AMERICA, LLC

-- Remove the pressure relief valve -1- using the :T10545 .

-- Remove the oil spray jet -2-.