Engaging the Release Cable in Release Lever

Courtesy of AUDI OF AMERICA, LLC

-- Install the release cable -2- into the hood release lever -1- in the direction of the -arrow-.

-- Move the release cable -2- upward as illustrated and clip it into the bracket -1-.

Courtesy of AUDI OF AMERICA, LLC

Routing The Release Cable Inside The Passenger Compartment 

Courtesy of AUDI OF AMERICA, LLC

-- Route the release cable -2- along the >>A-pillar<< as illustrated.

-- Press the grommet -1- onto the >>A-pillar<< from the interior.

Routing The Release Cable Inside The Engine Compartment 

Courtesy of AUDI OF AMERICA, LLC

-- Route the release cable -2-, starting from the passenger compartment, inside the engine compartment and along the fender flange -3- as illustrated.

-- Push the grommet -1- into the A-pillar.

-- Slide the coupling -4- onto the lock carrier. Refer to RELEASE CABLE, REMOVING AND INSTALLING .