LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> RS 7 Base >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Exterior Body Panels (Hood, Lids) (Service Information) >> (55 Hood, Lids) >> Hood >> Hood, Removing And Installing >> Hood Impact Guard, Replacing

Hood Impact Guard, Replacing

NOTE:

The impact guard is also equipped with double-sided adhesive tape.

GWWA55-10703Courtesy of AUDI OF AMERICA, LLC
  1. Clip
  2. Impact Guard
    • To remove, remove the clip from the hood and then remove the impact guard.
  3. Door
scientia non olet · About LEMON Manuals