Hood, Adjusting

Special Tools And Workshop Equipment Required 

• Gauge - Gap Adjustment :3371 

Gap Dimensions For Hood 

Courtesy of AUDI OF AMERICA, LLC

• Dimension -A- = 4.5 mm
• Dimension -B- = 4.5 mm
• Dimension -C- = 6.0 mm HOOD, ADJUSTING 
• Dimension -D- = 3.0 mm
• Dimension -E- = 4.5 mm

Gap Dimension On The Headlamp 

Courtesy of AUDI OF AMERICA, LLC

-- The gap dimension -c- = 6.0 mm between the hood -1- and the headlamp -2- must be set as illustrated.

Height Adjustment Stop Buffer 

Courtesy of AUDI OF AMERICA, LLC

1. Stop Buffer
   • The stop buffer -1- also works as a strike guard.
2. Hood
3. Adjusting Buffer
   NOTE:

   The adjusting buffers -2- are used to adjust the height of the hood.

   • The adjusting buffer -2- must lightly contact the lock carrier when the hood is closed.