LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> RS 7 Base >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Exterior Body Panels (Hood, Lids) (Service Information) >> (55 Hood, Lids) >> Hood >> Hinges, Removing And Installing

Hinges, Removing And Installing

GWWA55-10707Courtesy of AUDI OF AMERICA, LLC
  1. Hood
  2. Hood Hinge
    • Removing 

      -- Before removing a hood hinge, support the hood or secure it against falling.

      -- Remove the gas-filled strut. Refer to GAS-FILLED STRUT, REMOVING AND INSTALLING .

      -- Remove the bolts -5- and nuts -6-.

    • Installing 

      -- Align with the markings -arrows- in reverse order.

  3. Gas-Filled Strut
  4. Fender Flange
  5. Bolt
    • 21 Nm
  6. Nut
    • 21 Nm
scientia non olet · About LEMON Manuals